![How To Restoration](/img/default-banner.jpg)
- 74
- 5 427 776
How To Restoration
United States
Приєднався 5 лип 2021
My Name Is Behnam And this channel is How To Restoration. My Grandfather Was a Carpenter And My Father Continued to do the same, and since I have lived with tools since I was a child, I have a strong interest in them. I believe that old tools should not be thrown away, it should be refurbished and reused. I believe that anything that is older and has been built before has a solid structure and is very durable and built with principles. All tools today are mass produced with very low quality. My mindset is that I was born in 1990 and I will leave the world once, so I do what makes me feel good. I haven't tested many tools yet and I want to get to them and my art one day. I will create with those tools.
contact info: HowToRestoration@gmail.com
contact info: HowToRestoration@gmail.com
Transforming Old Rusty Tool: A Must-See Restoration !
This is a very rusty pipe that was lying in a corner of the warehouse and I took it to restore it, it was very rusted and the rust had penetrated the iron.
I had a hard time separating the pieces at first.
Then I painted it with a paint remover, and then I polished the parts of the iron that were damaged by working with a file.
It was discolored, it was getting to the fence where it was red, so I sprayed it with a nice red paint.
I needed two pins, which I created from two screws I had in the scraps.
The pipe cutter blade was not in place, I bought a new blade for it and installed it in its place and started assembling.
04:57 The second video :
What we have here is a very versatile tool that can be used as a hammer, ax and nail driver. This multi-purpose tool was for my friend and he had put it in a corner for a long time and did not use it. One day I was gone. When I visited my friend, my eyes fell on this device and I asked him, why did you leave this valuable device in a corner and not use it?
He said: I would like to restore it, but I don't have enough tools and experience to restore it.
I asked him to leave it to me, and knowing that I was a skilled craftsman and capable of restoring it, he gave me the tools and I began to restore it.
Handle:
his handle was bent under a lot of pressure and the sticks of his handle were not clear what happened to him.
I made a new walnut handle for it, straightened out the bent handle, knocked the rust off with a 12v electric.
I blackened the body of the tool except for the ax blade and the hammer with ultra blue alum so that it does not rust at all.
And finally, as you can see in the video, I turned it into a useful and beautiful tool again.
My name is Behnam and this is the How to restoration channel. My grandfather was a carpenter and my father continued to do the same, and since I have lived with tools since I was a child, I have a strong interest in them. I believe that old tools It should not be thrown away, it should be restored and used again. I believe that everything that is older and has been made before has a solid structure and is very durable and made with principles. All tools today are mass produced with very low quality. My way of thinking is that I was born in 1990 and I will leave the world once, so I do what makes me feel good. I haven't tested many tools yet and I want to reach them one day and my art. I will create with those tools. I earn from UA-cam and if you want to support me in this way, I would appreciate it if you subscribe to my channel and follow the videos.
ua-cam.com/channels/GqE5AVtH4fjpeYynK5qpIQ.html
Facebook : profile.php?id=61559011022100
Tik Tok : www.tiktok.com/@howtorestoration?_t=8opmwL9DEW7&_r=1
#restoration #diy #axe
I had a hard time separating the pieces at first.
Then I painted it with a paint remover, and then I polished the parts of the iron that were damaged by working with a file.
It was discolored, it was getting to the fence where it was red, so I sprayed it with a nice red paint.
I needed two pins, which I created from two screws I had in the scraps.
The pipe cutter blade was not in place, I bought a new blade for it and installed it in its place and started assembling.
04:57 The second video :
What we have here is a very versatile tool that can be used as a hammer, ax and nail driver. This multi-purpose tool was for my friend and he had put it in a corner for a long time and did not use it. One day I was gone. When I visited my friend, my eyes fell on this device and I asked him, why did you leave this valuable device in a corner and not use it?
He said: I would like to restore it, but I don't have enough tools and experience to restore it.
I asked him to leave it to me, and knowing that I was a skilled craftsman and capable of restoring it, he gave me the tools and I began to restore it.
Handle:
his handle was bent under a lot of pressure and the sticks of his handle were not clear what happened to him.
I made a new walnut handle for it, straightened out the bent handle, knocked the rust off with a 12v electric.
I blackened the body of the tool except for the ax blade and the hammer with ultra blue alum so that it does not rust at all.
And finally, as you can see in the video, I turned it into a useful and beautiful tool again.
My name is Behnam and this is the How to restoration channel. My grandfather was a carpenter and my father continued to do the same, and since I have lived with tools since I was a child, I have a strong interest in them. I believe that old tools It should not be thrown away, it should be restored and used again. I believe that everything that is older and has been made before has a solid structure and is very durable and made with principles. All tools today are mass produced with very low quality. My way of thinking is that I was born in 1990 and I will leave the world once, so I do what makes me feel good. I haven't tested many tools yet and I want to reach them one day and my art. I will create with those tools. I earn from UA-cam and if you want to support me in this way, I would appreciate it if you subscribe to my channel and follow the videos.
ua-cam.com/channels/GqE5AVtH4fjpeYynK5qpIQ.html
Facebook : profile.php?id=61559011022100
Tik Tok : www.tiktok.com/@howtorestoration?_t=8opmwL9DEW7&_r=1
#restoration #diy #axe
Переглядів: 2 890
Відео
Making an Amazing Handle For This Knife | Cut Paper Easily
Переглядів 9 тис.День тому
Hello friends, this time I am going to fix a rusty knife. First, I removed the rust of this knife with a wire brush and then I started to polish it. The edge of the knife was damaged. I sanded the edge of the knife with a belt sander like the first day and sanded it with 220 grit and then with 360 grit and then started polishing the knife. The steps are very simple, I hope you enjoyed this vide...
Antique Yankee Screwdriver Restoration!
Переглядів 29 тис.21 день тому
In this video I am going to restore a Stanley Yankee screwdriver, I hope you enjoy this video, I will first remove all the scratches on the surface of the Stanley Yankee screwdriver with a wire brush and start to open its parts This screwdriver has very small parts that we must be careful not to lose any parts of it. I stick all the small parts to a magnet because it is easier for me, then with...
Woodworking DIY: Creative Projects Using Extra Wood!
Переглядів 38 тис.Місяць тому
Woodworking DIY: Creative Projects Using Extra Wood!
I Turned A $1 Hammer Into A Work Of Art!
Переглядів 540 тис.2 місяці тому
I Turned A $1 Hammer Into A Work Of Art!
Restoration 100 YR Old Antique Swedish Jack!
Переглядів 807 тис.3 місяці тому
Restoration 100 YR Old Antique Swedish Jack!
I Turned This Uzbek Knife Into A Work Of Art!
Переглядів 391 тис.5 місяців тому
I Turned This Uzbek Knife Into A Work Of Art!
100 YR Old Russian Ax Restoration!
Переглядів 286 тис.6 місяців тому
100 YR Old Russian Ax Restoration!
I Found a Scale And recovered It And Am Using It-Longer Ray5 10W
Переглядів 8 тис.7 місяців тому
I Found a Scale And recovered It And Am Using It-Longer Ray5 10W
It Was A Junk Wrench, I Gave It a New Life
Переглядів 8 тис.8 місяців тому
It Was A Junk Wrench, I Gave It a New Life
Restoring of an Old Rusty Iranian Knife
Переглядів 46 тис.9 місяців тому
Restoring of an Old Rusty Iranian Knife
Restoration Old Rusty Germany Lock!
Переглядів 42 тис.11 місяців тому
Restoration Old Rusty Germany Lock!
I Turned 1$ Hammer Into A Work Of Art!
Переглядів 19 тис.Рік тому
I Turned 1$ Hammer Into A Work Of Art!
This Is How To Restore A Broken ax | X-Tool M1 Unboxing
Переглядів 24 тис.Рік тому
This Is How To Restore A Broken ax | X-Tool M1 Unboxing
Antique Alexander Werk Meat Grinder Restoration -xTool M1 Unboxing
Переглядів 10 тис.Рік тому
Antique Alexander Werk Meat Grinder Restoration -xTool M1 Unboxing
I Restored This German Scissors Like The First Day
Переглядів 27 тис.Рік тому
I Restored This German Scissors Like The First Day
Restoration Of The Antique US M1 Bayonet
Переглядів 12 тис.Рік тому
Restoration Of The Antique US M1 Bayonet
How To Make An Artistic Ax Handle | Restoration Rusty Old Azerbaijan Ax
Переглядів 13 тис.Рік тому
How To Make An Artistic Ax Handle | Restoration Rusty Old Azerbaijan Ax
Restoration Of The Rusty Vintage Sword Make By Stihl Guide Bar
Переглядів 6 тис.Рік тому
Restoration Of The Rusty Vintage Sword Make By Stihl Guide Bar
RESTORING The Most RUSTY Vintage MECHANICAL JACK!
Переглядів 22 тис.Рік тому
RESTORING The Most RUSTY Vintage MECHANICAL JACK!
80-Year-Old Rusty and Underground Knife-Partial restoration
Переглядів 19 тис.Рік тому
80-Year-Old Rusty and Underground Knife-Partial restoration
I Restored A Rusty 1929 Mechanical Jack - It Works!
Переглядів 126 тис.Рік тому
I Restored A Rusty 1929 Mechanical Jack - It Works!
Restoration of The 100 Years Old Antique Sword [1m Long]
Переглядів 287 тис.Рік тому
Restoration of The 100 Years Old Antique Sword [1m Long]
Restoration Of a 50 kg Pocket Balance Scale Maker Brand England[Nice Restoration]
Переглядів 34 тис.Рік тому
Restoration Of a 50 kg Pocket Balance Scale Maker Brand England[Nice Restoration]
Restoration of The Beretta toy gun That Was Very Rusty
Переглядів 260 тис.Рік тому
Restoration of The Beretta toy gun That Was Very Rusty
HOW TO RESTORATION AN OLD MANUAL JUICER - This is How You Do It
Переглядів 12 тис.Рік тому
HOW TO RESTORATION AN OLD MANUAL JUICER - This is How You Do It
Обычный топор, никакого "произведения искусства" тут нет!!!
А почему раньше не проделал эту работу и без камеры? У тебя весь такой инструмент засранец?
kinda suspicious ngl
Думаю парень не работу показал,а свою мастерскую.мастерская класс.напильники это просто "понты"все на щетках и наждаке можно отшлифовать.и никогда не видел чтоб молоток так расклинивали.со времень расшвтается,как подтягивать.ну если только в шкаф поставить ,на полку.
@@gerasidorov9977 Я очень старался подготовить инструменты для мастер-класса, надеюсь, видео вам понравится, спасибо, дорогой друг.❤️😉
Sieht echt gut aus!/ Looks very good!
That’s so kind of you🙏🙏
I always wanted one of these!!!
❤️😉
@@HowToRestoration apparently they are called roofing hammer, but no good quality modern version is available.
Transformou um martelo...num martelo🙄
@@izaiasbatista102 😉❤️
I have this exact tool. But I can't find the year it was made. Any idea you have is greatly appreciated.
@@terrywebb4563 ❤️
Possuo uma machadinha idêntica a essa, eu a comprei nos anos 90, a minha foi fabricada pela IMBEL (Industria de Material Bélico),ela encontra-se em perfeito estado . Parabéns pela restauração, ficou perfeita.
@@luizclaudiopimentel3032 Your support means the world❤️🙏
Klasse 👍👍👍
Thanks bro 😉❤️
Excelente trabajo.👍
That’s so kind of you🙏🙏
Very nice work on both of these !! They look and work wonderful !! 👍👍
Thank you! Cheers!
I po co Ci to???? Że tobie się chciało bawić z kawałkiem żelastwa.Ja bym to wywalił i kupił nowy za 30 złotych.
I want to share the art that I have in my hands with the whole world, that's the only purpose of making these videos.
nice work bro🤩
Thank you so much bro❤️😉
How you got it so sharp ?
I have done this work with a polishing felt
@@HowToRestoration ok
Hey, yo tengo ese cuchillo y lo uso bastante. Solo le cambié el mango y le hice una funda de cuero
Excellent, I hope you are successful!❤️😉
The handle is of much higher quality than the blade. it's probably Chinese 3Cr13Mov stainless or an equivalent. It's the sort of blade used on infomercial knives. But, the handle is truly great
Your support means the world❤️🙏
The knife looks cool .👏👏
Thanks Bro 😍😉
To support me, like the video and share with your friends. You can subscribe for more video! Suggested I Turned This Uzbek Knife Into A Work Of Art! ua-cam.com/video/60w7jAMS22Y/v-deo.html
..Nice!.. With a built in fulcrum..
Thanks for your comment! Glad you liked the built-in fulcrum feature!
OH YEAH !! THIS LOOKS SHARP !! I love that handle and the polish is perfect it shines so bright and cuts like a razor ver very nice work !! I also like the wrist strap very nice touch !! 👍👍
@@robertmanley7556 thanks bro ❤️😉
Great 👍👍👍
Thank you 👍
Отличная реставрация, вот только вопрос в качестве металла? Стоит оно того?
Да, материал лезвия ножа хороший.
@@HowToRestorationХороший металл напильником не берётся...🤣🤣🤣
@@IgorCherenichenko Материал файла также лучше, чем у пружины.
nice work. go with satin for pitted surfaces
That’s so kind of you🙏🙏
a little oil and no need to repair ;)
😉🙏
That's awesome bro خیلی زیبا بود داداش کارت حرف نداره
@@nature-agriculture-with-Esi بسیار ممنونم ❤️🙏
Now that's a damn fine hammer!
Thanks 😉
Oh yes, early cordless screw drivers... Thumbs Up!
Thanks bro 🙏😉
Wow!!! This was incredible… I enjoy restoring old tools even with my meager amateurish skills. Your skill set is wide ranging and thorough. Well done sir!! The Old Army Scout…
Thanks 😉🙏
I’m conflicted. I can appreciate the work/skill that is involved. Beautiful. But is it a tool or art? If it’s a tool it’s going to get used and the time spent will be a waste. If it’s art, it is just a normal (albeit polished) hammer. Should I buy a 20$ hammer and polish it and call it “art”? 🤷🏻♂️
Your support means the world❤️🙏
Cool
That’s so kind of you🙏🙏
Excelente trabajo ❤👍👏👏👏👏👏👏👏👏!!!!!!!
Thank you❤️😉
❤❤❤❤❤❤❤
❤️😉
❤❤❤❤بسیار زیبا ماشاءالله آقا بهنام🎉🎉🎉🎉🎉
Your support means the world❤️🙏
It's an old roofing hammer, for slate shingles. I still have one from when I used to do high end roofs.
👍❤️
I still have two of them in my toolbox in my shed, the model you restored was the 131, the smaller of the two Yankee models. I was taught never to release the spring loaded tip, as it would damage the mechanism of the screwdriver.
❤️🙏
@@HowToRestoration Thank you. ps, did you know that if you lose the screw that holds the cover over the selected slider, you can replace it with a terminal screw from any electrical plug or socket.
Pues será muy noble el martillo, la herramienta más antigua, con trabajo minucioso y exacto. PERO TRABAJO, HERRAMIENTAS, MATERIALES Y ENERGÍA ELÉCTRICA, YA TE HUBIERAS COMPRADO 10 MARTILLOS DE ALTA GAMA.
Mi objetivo no era reconstruir el martillo, tal vez muchos artesanos hábiles y mejores puedan hacerlo tan bien y mejor que yo, pero mi objetivo es compartir la artesanía y el arte que tengo en mis manos con la gente del mundo.❤️😉
Great job!
🙏 I’m so grateful😉
👍👏🥃👍👏🥃👍👏🥃👍👏🥃👍👏🥃👍👏🥃👍👏🥃
Son de lo mejor que se han inventado....tengo 2 antiguos de estos tipos de Yanque Screwdriver.. .valdria la pena lo hagan con mas calidad las fabricas de hoy....😊
Thanks
You shouldn't grind a knife blade like that. You're annealing the steel cutting edge.
I don't put too much pressure on the blade
I think it was OK, not too hot, but I'm not an expert.
@mjracaniello 🤷🏻♂️
Задача-как заточить кусок ржавого ничего. Примечание:зачем? Ответ:...............
Answer: The interest and respect I have for my father's and grandfather's tools And at the same time earning money from something I am interested in. Is there anything better than this?? 😉❤️
Very nice🌹👏👍🌹🌹 very good👌👍
Thank you very much❤️😉
Профанация!
😐❤️🤷🏻♂️
Spil alat pasrah kayunya dong
Yes, That’s so kind of you🙏🙏
@@HowToRestoration thank you
Хорошее видео, огромная проделанная работа . Удачи вам
Thank you bro❤️😉
Nonsens!
I appreciate it❤️🙏😐
It looks great and you did a wonderful job restoring it as well!!!! I enjoyed your video so I gave it a Thumbs Up
Thank you very much!❤️😉